The ClayTech BlueDiver 20 has been specifically designed for the Australian aerated waste water treatment system. Designed for high head applications it is particularly suited for applications like sub-surface irrigation.
The BlueDiver 20 has been designed to ClayTech specifications of high head and relatively low flow, allowing the pumping system to operate at its 'best efficiency point'. The BlueDiver has a ceramic shaft, three lip seals and thermo-plastic and stainless steel housing.
Power Absorbed (w) 600
Maximum Head (m) 24
Max Flow Rate (L/min) 68
Outlet Size (mm) 25.4
Pump Diameter (mm) 149
Pump Height (mm) 350
Weight (kg) 7
The ClayTech BlueDiver 30 has been specifically designed for the Australian aerated waste water treatment system. Designed for high head applications it is particularly suited for applications like sub-surface irrigation.
The BlueDiver 30 has been designed to ClayTech specifications of high head and relatively low flow, allowing the pumping system to operate at its 'best efficiency point'. The BlueDiver has a ceramic shaft, three lip seals and thermo-plastic and stainless steel housing.
Power Absorbed (w) 750
Maximum Head (m) 34
Max Flow Rate (L/min) 68
Outlet Size (mm) 25.4
Pump Diameter (mm) 149
Pump Height (mm) 375
Weight (kg) 8
The ClayTech BlueDiver 40 has been specifically designed for the Australian aerated waste water treatment system. Designed for high head applications it is particularly suited for applications like sub-surface irrigation.
The BlueDiver 40 has been designed to ClayTech specifications of high head and relatively low flow, allowing the pumping system to operate at its 'best efficiency point'. The BlueDiver has a ceramic shaft, three lip seals and thermo-plastic and stainless steel housing.
Power Absorbed (w) 950
Maximum Head (m) 45
Max Flow Rate (L/min) 68
Outlet Size (mm) 25.4
Pump Diameter (mm) 149
Pump Height (mm) 400
Weight (kg) 9
The ClayTech BlueSub 15 possesses a unique design, conceived especially for the Australian waste water treatment system.
The BlueSub 15 was designed for above surface irrigation applications where its unique design allows it to operate at its 'best efficiency point' during normal operation. Most comparable pumps on the Australian market have a maximum head capacity of 11m. This means that they operate towards the top of their curve under normal operating conditions causing a reduction in the pumps service life.
The BlueSub 15, at 10m head is at the centre of its curve, and still produces 80 LPM.
Power Absorbed (w) 750
Maximum Head (m) 14.5
Max Flow Rate (L/min) 170
Outlet Size (mm) 32
Pump Diameter (mm) 150
Pump Height (mm) 325
Weight (kg) 5
